Description
This replacement belt is listed by total belt length in inches.
Please note that total length is not the same as diameter or folded length.
This belt may be used in vintage audio equipment, including cassette decks, CD players, turntables, car radios and reel-to-reel recorders.
Please compare the listed length with your original belt before ordering.
Condition: New part for technical replacement. Not model-specific.
Package Contents:
Difficulty
Easy to moderate · typically 15–45 min for a first-timer with basic tools.
Tools needed
Phillips & flat screwdrivers, plastic tweezers, isopropyl alcohol (90%+), cotton swabs
Common mistakes to avoid
- Handling the new belt with bare fingers — skin oils cause slipping. Use tweezers or clean hands with alcohol first.
- Not cleaning old belt residue off the pulleys — degraded rubber turns to goo and the new belt will slip. Clean every pulley with isopropyl alcohol before fitting.
- Forgetting the routing — take a photo of the old belt path before removing anything.
- Twisting a flat or square belt during fitting — it must sit flat in the pulley groove.
- Overstretching the belt while installing — walk it gently over the pulleys instead of pulling hard.
If the old belt has melted into tar, remove all residue completely first — a lighter fluid–damped swab works on stubborn goo, followed by isopropyl alcohol. Let everything dry before fitting the new belt.
Stuck mid-repair? Send us a photo of the mechanism — free specialist support by vintage audio repairers.
SQ8.3 Square Belt – 0.04" thick – Total Length 8.3 in
Original part, tested before dispatch · covered by our 30-day return guarantee
- ✓ Free 30-day returns
- ✓ Fast worldwide shipping
- ✓ Secure checkout
Shipped from Portugal. Select your destination to see estimated shipping options.
* Delivery estimates use working days, Monday to Friday, excluding National Holidays in Portugal.
Repairing this model?
More parts for
Confirmed in the compatibility database for this exact model.
