Description:
Premium lithium soap grease including solid lubricants with excellent lubricating.
Ideally suited for roller bearings, slide bearings, guides, roller, guides, ball joints, splines and small low-speed gears.
DO NOT use in plastic parts.
Properties:
Premium Lithium Soap Grease offers superior load-carrying capability, extended application intervals, good oxidation resistance, lubrication in challenging oil film creation conditions, reduced wear, superior water resistance, corrosion resistance, and prevention of fretting corrosion.
Technical Data:
Appearance: Black
Penetration (worked 60 times): 265 to 295 mm/10
NLGI Class: 2
Drop Point: 185°C
Service Temperature Range: -30°C to 130°C
Bleed (100°C, 24 hours): 2.0%
Evaporation (99°C, 22 hours): 0.2%
Oxidation Resistance (99°C, 100 hours): 0.03 MPa
Water Washout (38°C/1 hour): 1.0%
Shell Four Ball Test (load): 3,150 N
Wear Scar (1 hour, 800 N): 1.2 mm
FAG Bearing Test (6,000 rpm, 130°C, 4,500 N): 40 hours
DN Value: 450,000 mm/min
Application:
Clean the points of contact on the equipment thoroughly to remove any dirt, dust, or previous lubricants.
Application: Apply a small amount directly to the lubrication points.
Ensure precise and controlled application to avoid over-lubrication.
Regular Maintenance: Periodically check the lubrication points and reapply silicone oil as needed.
The frequency of reapplication may vary based on usage and manufacturer recommendations.
