Description
Content: 1 Square Belt
Compatible Model: DH16A6S
This product we offer here is not a original spare part.
Condition: New
Difficulty
Easy to moderate · typically 15–45 min for a first-timer with basic tools.
Tools needed
Phillips & flat screwdrivers, plastic tweezers, isopropyl alcohol (90%+), cotton swabs
Common mistakes to avoid
- Handling the new belt with bare fingers, skin oils cause slipping. Use tweezers or clean hands with alcohol first.
- Not cleaning old belt residue off the pulleys, degraded rubber turns to goo and the new belt will slip. Clean every pulley with isopropyl alcohol before fitting.
- Forgetting the routing, take a photo of the old belt path before removing anything.
- Twisting a flat or square belt during fitting, it must sit flat in the pulley groove.
- Overstretching the belt while installing, walk it gently over the pulleys instead of pulling hard.
If the old belt has melted into tar, remove all residue completely first, a lighter fluid–damped swab works on stubborn goo, followed by isopropyl alcohol. Let everything dry before fitting the new belt.
Stuck mid-repair? Send us a photo of the mechanism, free specialist support by vintage audio repairers.
Lite-On DH-16A6S Eject Tray Drive Belt for CD-ROM Drive
Notify me when available
One email when it's back in stock. No newsletter, no spam.
Shipped from Portugal. Select your destination to see estimated shipping options.
* Delivery estimates use working days, Monday to Friday, excluding National Holidays in Portugal.
Repairing this model?
More parts for
Confirmed in the compatibility database for this exact model.
